Pre-installation: Before applying RV RoofMagic do a
thorough inspection of the entire RV roof.
Search for any separations around seams and AC and fan vents. Water wash
the entire roof with bristle brush to remove any dirt or debris. Mix two cups
of Clorox with every gallon of water to kill any bacteria residing on the
surface of roof. Also use a mild degreaser to remove oil residue. Now let the
roof to dry out.
Application: RV RoofMagic is a ready to use
product, no thinning is required. Mix it approximately for five minutes with an
electric drill. Apply RvRoofMagic with nap rollers and paint brushes as needed.
Average dry to touch time is three to four hours and will completely dry in
four to ten hours. Wait for 24 hours before going on a journey.
Tips: Always plan to apply the product when
rain is not forecasted. RV RoofMagic is for outdoor use but can be used indoors
by using respirator commonly available at stores. When the product dries
out any brush or roller marks will vanish away and one will have a seamless
coating waiting for you. Clean the coating with xylene as and when needed.
It’s always
good to get advice from expert https://www.rvroofmagic.com/contact.php or visit to read detailed
application process and instruction manual https://www.rvroofmagic.com/application-process.php.
No comments:
Post a Comment